|
|
|
|
|
|
|
|
|
|
|
|
|
|
| GPS modulesMake your own GPS receiver |
Here is a selection of GPS modules. All our modules are tested before shipping
and we also have experience in programming microcontrollers of the TI MSP430
series to access these modules. We can therefore help you in your developments.
When buying either of these modules together with a development board, you will
get a full working demo software showing the current lattitude and longitude
on the LCD.
|
|
|
|
|
|
|
|
|
|
|
|
| Click for more detail |  |
| | | Bare GPS module |  | Having no antenna, this module is very thin and can be used in systems with
dimension constraints or in places where the module itself cannot receive
signals (e.g. vehicule). It has threfore to be used with an antenna, and you
may want to buy a GPS pad antenna.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Click for more detail |  |
| | | GPS module with patch antenna | | | This is a compact and affordable GPS module. Its outline size is 26.5 x 26.5 mm
and its thickness is 8.5 mm approximately. It communicates by UART at 9600 bps,
default rate. This default rate can be changed using module's protocol. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Click for more detail |  |
| | | Low-profile GPS module | | | This module has basically the same characterstics as PW-GPS-06 and 06P,
but its patch antenna has a slightly better gain and is it 2 mm thinner.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| | | Pad antenna |  | | This is a GPS antenna that can be used with either of our modules. If the
module has already an antenna, it will choose whatever signal is stronger. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
